Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Remove the air tube from the air box's air intake
Observation:
Thoroughly inspect the air box attached to the fan assembly, ensure the air box is clear of any blockages.
Note:
The fan assembly and air box do not need to be removed to carry out this inspection, it can be carried out in situ, using either a mirror or removing the right hand side panel.
Note:
The fan assembly and air box do not need to be removed to carry out this inspection, it can be carried out in situ, using either a mirror or removing the right hand side panel.
Isolate as per TOPs P4
and refit as necessary