Set Appliance State:
Mains Power Off
Turn Hot Water Tap On
Purge Switch in NORMAL position
HW Switch in ON position
CH Switch in OFF position
HW Potentiometer set to maximum
HW Switch in ON position
CH Switch in OFF position
HW Potentiometer set to maximum
Gas On
| WARNING! Mains voltage is expected during test, follow TOPs P4 live testing procedure |
Observation:
Allow the Burner to operate with a high gas output pressure of approximately 10 mb.
Does the Boiler raise the water temperature approximately 45 degrees at a flow rate of 9.3 litres/min?
Does the Boiler raise the water temperature approximately 45 degrees at a flow rate of 9.3 litres/min?