Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Observation:
Examine the fan sensing pipe, the burner sensing pipe and their seals for damage, blockages and signs of condensation
(it will require the removal of pipes and 'O' rings for full inspection).
Refit the pipes after inspection.
Note:
Ensure on re-assembly that the gasket and 'O' ring seals are satisfactory or it may prevent the boiler from firing.
(it will require the removal of pipes and 'O' rings for full inspection).
Refit the pipes after inspection.
Note:
Ensure on re-assembly that the gasket and 'O' ring seals are satisfactory or it may prevent the boiler from firing.
