Set Appliance State:
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
CH output setting is changed by altering one or both menu 2 option
2.1A and menu 3 option 3.1A. (2.1A cannot be set higher than 3.1A is set to).
Click here for more information on accessing and setting boiler parameters.
Normal setting, default and maximum value is 24kW.
Note:
If boiler setup parameters have been changed from their default
settings. Confirm if this is intended before adjusting then if
necessary recheck boiler operation to confirm it has remedied
the fault with the appliance.
Boiler CH output adjusted to correct KW output click below to retest boiler.
RETEST BOILER CH OPERATION CLICK HERE
2.1A and menu 3 option 3.1A. (2.1A cannot be set higher than 3.1A is set to).
Click here for more information on accessing and setting boiler parameters.
Normal setting, default and maximum value is 24kW.
Note:
If boiler setup parameters have been changed from their default
settings. Confirm if this is intended before adjusting then if
necessary recheck boiler operation to confirm it has remedied
the fault with the appliance.
Boiler CH output adjusted to correct KW output click below to retest boiler.
RETEST BOILER CH OPERATION CLICK HERE
