SE RESET GUIDE

SE code appears in the display when the boiler requires a service. If the appliance has been maintained correctly then the indicator can be reset. If the appliance requires maintenance this should be carried out before the indicator is reset.
To reset the service indicator follow the process below:

Measurement:

Step 5:
Press the spanner button once and the appliance will return to normal operation

wc greenstar cdi smps spanner and 1a.gif

wc greenstar cdi smps dis spanner and 5a.gif

wc greenstar cdi smps dis spanner,chimney and 00.gif

wc greenstar cdi smps dis spanner,chimney and brackets.gif

Step 1:
Press and hold the Button marked with the picture of a spanner for 10 seconds. The button will illuminate orange and the display will show 1.A.

Step 2:
Press the button marked ECO repeatedly until 5 A. is present in the display.

Step 3:
Press the chimney sweep button once. The chimney sweep button will illuminate and the display will change to 00.

Step 4:
Press and hold the chimney sweep button until brackets appear in the display. The button can then be released.