Set Appliance State:
Turn Hot Water Tap On
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Allow burner to ignite and run for DHW demand.
With a flow rate as per table, is the DHW temperature rise and operation satisfactory? (see note)
Note.
1. To investigate a poor water flow rate from the tap CLICK HERE
2. Flow rates lower / higher than the flow rate specified will result in a higher / lower temperature rise, this must be taken into account when selecting an outcome of the test.
3. Default target DHW temperature is 55°C. HOW TO ADJUST TARGET TEMPERATURE
With a flow rate as per table, is the DHW temperature rise and operation satisfactory? (see note)
Note.
1. To investigate a poor water flow rate from the tap CLICK HERE
2. Flow rates lower / higher than the flow rate specified will result in a higher / lower temperature rise, this must be taken into account when selecting an outcome of the test.
3. Default target DHW temperature is 55°C. HOW TO ADJUST TARGET TEMPERATURE
