To access the parameters press the tap and
radiator keys simultaneously and hold for 5 seconds.
The red LED flashes and the display shows:
PARAMETER 18 - RE-IGNITION DELAY
To access the parameters press the tap and
radiator keys simultaneously and hold for 5 seconds.
The red LED flashes and the display shows:
Scroll through using the tap or radiator key until the display shows 18 (this is parameter 18)
To enter the parameter press the + or - key. The value set flashes and the display will show a value between 0 - 10 mins.
Note:
Whatever value is flashing on the display is the number of minutes that the re-ignition delay is set at. The default setting is 3.
Whatever value is flashing on the display is the number of minutes that the re-ignition delay is set at. The default setting is 3.
To exit the parameters press the Reset key.
Adjustment of parameter values;
To change the set value press the + or - keys.
To confirm the set value press the tap or radiator key.
To change the set value press the + or - keys.
To confirm the set value press the tap or radiator key.