Adjust, Service, Repair or Replace as necessary
Isolate Water and Gas as appropriate
Location:
Tests have found no components causing the fuse to blow, try replacing the fuse. If it blows again it is likely the PCB is causing the fuse to blow and it will need to be replaced.
| Isolate Mains Power to appliance as per TOPs P4 |
Location:
Upon completion of the fault diagnostics carry out final electrical safety tests and checks as per TOPs (C6).
Part Number: E39470
Refer to ADAPT for further information.
Please leave Feedback about this diagnosis via:
XSOL FEEDBACK FORM
Phone - 722429
or Email - Diaglab@britishgas.co.uk
