Isolate Mains Power to appliance as per TOPs P4
G.C. Number 47 026 05
Please note:
This model IS for appliances manufactured after 1999 week 43 which uses one PCB ONLY. (MF03 versions)
This model MUST NOT be used for appliances manufactured earlier than 1999 week 43 which use 2 PCB's. (MF01 and MF02 versions)
Any attempt to do so will lead to a misdiagnosis as the appliances work differently
and also have other components that differ.

Case removal
Outer case - Remove two securing screws from the rear bottom corners and lift off.
Facia - Remove two fixing screws, lift the two metal brackets, rotate down the front panel.