Set Appliance State:
Turn Hot Water Tap On
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Allow boiler to ignite and run for DHW demand.
With a flow rate as per table, is there a DHW temperature rise of 35°C and operation satisfactory?
Notes:
1. To investigate a poor water flow rate from the tap CLICK HERE
2. Appliances are factory fitted with a restrictor that limits the flow rate to just under the figures in the table.
3. Flow rates lower / higher than the flow rate specified will result in a higher / lower temperature rise, this must be taken into account when selecting an outcome of the test.
4. If a fault code occurs during operation CLICK HERE
With a flow rate as per table, is there a DHW temperature rise of 35°C and operation satisfactory?
Notes:
1. To investigate a poor water flow rate from the tap CLICK HERE
2. Appliances are factory fitted with a restrictor that limits the flow rate to just under the figures in the table.
3. Flow rates lower / higher than the flow rate specified will result in a higher / lower temperature rise, this must be taken into account when selecting an outcome of the test.
4. If a fault code occurs during operation CLICK HERE
