Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Release the securing clip and remove the diverter motor
Note.
The diverter motor can be removed without the need for draining
Note.
The diverter motor can be removed without the need for draining
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Observe the operation of the diverter motor spindle.
The spindle should be seen to motor in and out during the purge.
The spindle should be seen to motor in and out during the purge.
Isolate as per TOPs P4
and refit as necessary