Set Appliance State:
Turn Hot Water Tap On
Ensure appliance is cool
Gas On
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Reset appliance if required (press and hold the reset button until the chimney
sweep button LED flashes rapidly, then release the reset button)
Does the fan run, burner ignite and establish smoothly?
Note.
1. The appliance will go to ignition lockout (3 red flashes) after 5 attempts to ignite,
reset appliance as required.
2. When the burner is established the chimney sweep led will illuminate green and blink off momentarily every 7 - 9 seconds.
sweep button LED flashes rapidly, then release the reset button)
Does the fan run, burner ignite and establish smoothly?
Note.
1. The appliance will go to ignition lockout (3 red flashes) after 5 attempts to ignite,
reset appliance as required.
2. When the burner is established the chimney sweep led will illuminate green and blink off momentarily every 7 - 9 seconds.
