Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Measurement:
CASE REMOVAL
Undo the two Phillips head screws (one either side) on the underside of the case.
Lift the case forwards at the bottom and then lift it clear of the locating lugs on the top of the appliance.
It will be necessary to remove the display controller from the front case and re attach it to the front of the appliance fascia for fault finding purposes.
Undo the two Phillips head screws (one either side) on the underside of the case.
Lift the case forwards at the bottom and then lift it clear of the locating lugs on the top of the appliance.
It will be necessary to remove the display controller from the front case and re attach it to the front of the appliance fascia for fault finding purposes.
