Set Appliance State:
Turn Hot Water Tap On
Gas On
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Reset appliance as required (Press reset button once then release)
Allow the fan to run, burner to ignite and establish and the
appliance to run with a DHW demand for 30 seconds.
Turn hot water tap OFF.
As soon as the demand ends the burner should extinguish.
Does the burner remain alight or extinguish straight away?
Note:
1. The burner has extinguished when the flame symbol is no longer on the display.
2. This test is to confirm that the gas valve is closing as soon as the demand ends.
Allow the fan to run, burner to ignite and establish and the
appliance to run with a DHW demand for 30 seconds.
Turn hot water tap OFF.
As soon as the demand ends the burner should extinguish.
Does the burner remain alight or extinguish straight away?
Note:
1. The burner has extinguished when the flame symbol is no longer on the display.
2. This test is to confirm that the gas valve is closing as soon as the demand ends.
