Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Turn Hot Water Tap On
Attach a pressure gauge to burner pressure test point
Remove Banjo connector from operator and connect rubber tube to connection as indicated on the image
Remove Banjo connector from operator and connect rubber tube to connection as indicated on the image
Gas On
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Blow into tube gently initially then slowly blow harder and observe the burner pressure.
When blowing down the tube does the burner pressure increase?
Note:
When pressure gauge is removed the pressure test point should be tightened and checked for gas tightness.
When blowing down the tube does the burner pressure increase?
Note:
When pressure gauge is removed the pressure test point should be tightened and checked for gas tightness.
Isolate as per TOPs P4
and refit as necessary