Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Remove the securing screw on the servo valve assembly
Slide the servo valve slightly to the right and it will detach from the support plate allowing access to the spindle and support
Slide the servo valve slightly to the right and it will detach from the support plate allowing access to the spindle and support
Observation:
Inspect the spindle and the nylon hole in the support plate
(the spindle can be removed for this) check they are both clean, smooth and free to move.
Note:
1. If these are satisfactory it is advisable to ensure they are clean and apply a small amount of silicone grease to the spindle before reassembly.
2. Sometimes the grease from manufacture has become stiff or sticky with age if this is present it is advisable to clean this off and apply new.
(the spindle can be removed for this) check they are both clean, smooth and free to move.
Note:
1. If these are satisfactory it is advisable to ensure they are clean and apply a small amount of silicone grease to the spindle before reassembly.
2. Sometimes the grease from manufacture has become stiff or sticky with age if this is present it is advisable to clean this off and apply new.
Isolate as per TOPs P4
and refit as necessary