Set Appliance State:
Set Multimeter to Resistance 
Isolate Mains Power to appliance as per TOPs P4
Measurement:
Measure resistance between A10, on PCB (track-side, middle right)
and the middle connection of microswitch SW2 (black connector).
Note:
Although SW2 has three connections only the top two are used.
It is the lower of these two connections which is used in the resistance measurement.
and the middle connection of microswitch SW2 (black connector).
Note:
Although SW2 has three connections only the top two are used.
It is the lower of these two connections which is used in the resistance measurement.
