Set Appliance State:
Turn Hot Water Tap On
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Allow boiler to ignite and run for DHW demand.
DHW OPERATION
Note.
1. To investigate a poor water flow rate from the tap CLICK HERE
2. If a fault code occurs during operation CLICK HERE
1. To investigate a poor water flow rate from the tap CLICK HERE
2. If a fault code occurs during operation CLICK HERE
Specification: This appliance is fitted with a flow restrictor, flow rates lower than the nominal flow rate specified (see table 1.) will result in a higher temperature rise, this must be taken into account when selecting the outcome of this test.
Is DHW operation satisfactory?
Is DHW operation satisfactory?
| Specification | 26 Kw | 30 Kw | 35 Kw |
| Nominal flow rate at 30°C rise | 12.4 l/min | 14.3 l/min | 16.7 l/min |
| Set flow rate | 10 l/min | 12 l/min | 14 l/min |
Table 1.