Set Appliance State:
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
The central heating pump can be set to operate in two different ways on this appliance.
ON = Energy Saving Mode - when set to this mode the pump will only run when needed based on the outside temperature as measured by the outdoor temperature sensor.
OFF = Heat Demand Mode - when set to this mode the pump will run as soon as there is a demand for heat.
Check the settings of the pump control mode as follows:
Enter the installer mode and access level 3 - d2.
(click here for information on how to do this)
Which way is the pump configured?
ON = Energy Saving Mode - when set to this mode the pump will only run when needed based on the outside temperature as measured by the outdoor temperature sensor.
OFF = Heat Demand Mode - when set to this mode the pump will run as soon as there is a demand for heat.
Check the settings of the pump control mode as follows:
Enter the installer mode and access level 3 - d2.
(click here for information on how to do this)
Which way is the pump configured?
