Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Remove the burner
Observation:
Inspect burner for damage and good general condition.
Note:
1. The burner can be accessed by removing the air - gas duct cover (7 screws).
2. Before reassembly check the integrity of all disturbed gaskets and seals and replace as necessary.
Note:
1. The burner can be accessed by removing the air - gas duct cover (7 screws).
2. Before reassembly check the integrity of all disturbed gaskets and seals and replace as necessary.
Isolate as per TOPs P4
and refit as necessary