Adjust, Service, Repair or Replace as necessary
Isolate Water and Gas as appropriate
Location:
If the system pressure is correct but the Low Water Pressure switch has not responded. This may be due to the Switch being faulty but could also be caused by a blockage in the Switch's water connection. Before replacing the switch it is advisable to remove and check the water connection on both the Switch and the brass manifold to which it is fitted.
| Isolate Mains Power to appliance as per TOPs P4 |
Location:
Upon completion of the fault diagnostics carry out final electrical safety tests and checks as per TOPs (C6).
Part Number: 371-310
Refer to ADAPT for further information.
Please leave Feedback about this diagnosis via:
XSOL FEEDBACK FORM
Phone - 722429
or Email - Diaglab@britishgas.co.uk
