Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Remove the venturi from the gas manifold
Observation:
Inspect for blockages or damage particularly around the drilled holes around the bottom of the component.
Note:
1. Before reassembly check the integrity of all disturbed gaskets and seals and replace as necessary.
2. Upon reassembly all disturbed joints should be checked for gas tightness.
Note:
1. Before reassembly check the integrity of all disturbed gaskets and seals and replace as necessary.
2. Upon reassembly all disturbed joints should be checked for gas tightness.
Isolate as per TOPs P4
and refit as necessary