Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Remove the ignition electrode from the burner door
Observation:
Inspect the spark gap.
It should be 3-4mm from the tip of the electrode to the tip of the earth probe.
Note:
1. Before reassembly check the integrity of all disturbed gaskets and seals and replace as necessary.
2. Upon reassembly all disturbed joints should be checked for gas tightness.
It should be 3-4mm from the tip of the electrode to the tip of the earth probe.
Note:
1. Before reassembly check the integrity of all disturbed gaskets and seals and replace as necessary.
2. Upon reassembly all disturbed joints should be checked for gas tightness.
Isolate as per TOPs P4
and refit as necessary