Adjust, Service, Repair or Replace as necessary
Isolate Water and Gas as appropriate
Location:
Tests have proven that the gas valve is faulty and this has caused the PCB to fail, the new gas valve must be fitted before the new PCB.
| Isolate Mains Power to appliance as per TOPs P4 |
Location:
Upon completion of the fault diagnostics carry out final electrical safety tests and checks as per TOPs (C6).
Part Number:
Refer to ADAPT for further information.
Please leave Feedback about this diagnosis via:
XSOL FEEDBACK FORM
Phone - 722429
or Email - Diaglab@britishgas.co.uk
