Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
JOHNSON & STARLEY QUANTEC 30C
Lower Front Panel:
Hinges down, then remove two screws,
one each side (behind covers)
Hinges down, then remove two screws,
one each side (behind covers)
Combustion Chamber:
5 screws at the bottom of the panel then pull back and lift
5 screws at the bottom of the panel then pull back and lift
PCB Access:
4 screws on the rear of the front panel and lift off
4 screws on the rear of the front panel and lift off