Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Unclip and remove diverter motor
(this does not need appliance to be drained down)
(this does not need appliance to be drained down)
Observation:
Inspect diverter body / spindle and the motor for any signs of water ingress or damage.
Note:
If no water is present do not refit motor as the position it is in will affect the following test.
Note:
If no water is present do not refit motor as the position it is in will affect the following test.
Isolate as per TOPs P4
and refit as necessary