Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Set Multimeter to Resistance 
Disconnect the plug from the pump
Remove safety clip to expose electrical connectors
Remove safety clip to expose electrical connectors
Measurement:
Measure for continuity (zero resistance) on the live and neutral wires of the pump harness.
Measure from (refer to pictures):
Brown (pin 5) to pin furthest from cable on pump.
Blue (pin 6) to pin closest to able on pump.
Inspect harness and connectors for good overall condition.
Is the harness satisfactory?
Measure from (refer to pictures):
Brown (pin 5) to pin furthest from cable on pump.
Blue (pin 6) to pin closest to able on pump.
Inspect harness and connectors for good overall condition.
Is the harness satisfactory?
Isolate as per TOPs P4
and refit as necessary