Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Remove the fan hood assembly
Observation:
Inspect the burner assembly for blockages or damage.
Note:
1. If burner condition is ok do not reassemble as it will need to be removed for further tests.
2. Per manufacturer's instructions, upon reassembly a replacement gasket for the burner is required.
3. CAUTION: Flueway sump seal. Replace the sump seal every time that the Flueway to sump connection is disturbed.
(refer to Adapt for guidance)
Note:
1. If burner condition is ok do not reassemble as it will need to be removed for further tests.
2. Per manufacturer's instructions, upon reassembly a replacement gasket for the burner is required.
3. CAUTION: Flueway sump seal. Replace the sump seal every time that the Flueway to sump connection is disturbed.
(refer to Adapt for guidance)
Isolate as per TOPs P4
and refit as necessary