Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Turn Hot Water Tap On
Attach temperature clamp to DHW inlet pipe
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Check if the inlet temperature is above the
DHW temperature set point.
Note:
Set point ranges from 40°C with the DHW temperature control knob at minimum to 60°C at maximum.
DHW temperature set point.
Note:
Set point ranges from 40°C with the DHW temperature control knob at minimum to 60°C at maximum.
