Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Remove fan/manifold assembly
Remove the burner/baffles assembly
Remove the burner/baffles assembly
Observation:
Inspect burner/baffles for debris, damage and good general condition and are fitted correctly.
NOTE:
This component requires the air/gas manifold and fan assembly to be removed therefore
the gasket between the gas air manifold and the heat exchanger must be changed.
NOTE:
This component requires the air/gas manifold and fan assembly to be removed therefore
the gasket between the gas air manifold and the heat exchanger must be changed.
Isolate as per TOPs P4
and refit as necessary