Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Remove the electrode assembly
Observation:
Inspect flame sense electrode.
Thoroughly check for damaged or cracked insulation and that the tip is not damaged or distorted.
Note:
Before reassembly check the integrity of all disturbed gaskets and seals and replace as necessary.
Thoroughly check for damaged or cracked insulation and that the tip is not damaged or distorted.
Note:
Before reassembly check the integrity of all disturbed gaskets and seals and replace as necessary.
Isolate as per TOPs P4
and refit as necessary