XSol Diagnostic System

RESISTANCE DIVERTER VALVE ACTUATOR & HARNESS

Set Appliance State:

Isolate Mains Power to appliance as per TOPs P4

Set Multimeter to Resistance

Remove connector CN4 from the PCB

Measurement:

Measure for resistance across connections of CN303 as per table below:

vk compact 29a j18763 pcb insitu.jpg

vk compact 29 con cn4 discon.gif

@arrowdlc2bsmall.gif

@1t.gif

@3t.gif

@pblackurs.gif

@arrowright.gif

@arrowright.gif

@preddrs.gif

Black test probe	Red test probe	Resistance
Pin 1	Pin 2	7.0 - 8.5 Kohms or open circuit
Pin 1	Pin 3	7.0 - 8.5 Kohms or open circuit