Ensure hydroblock of appliance is plastic as shown in the picture.
If hydroblock is made of brass close model and reopen the correct version.
Notes:
1. For correct use of this diagnostic model the Pre-heat function needs to be disabled by turning the Pre-heat selector switch to the OFF position. If the preheat button is blanked out then appliance does not have a pre-heat function.
2. This model assumes appliance is operating on natural gas If it has been converted to LPG refer to ADAPT for gas pressures and potential differences in part numbers.
If hydroblock is made of brass close model and reopen the correct version.
Notes:
1. For correct use of this diagnostic model the Pre-heat function needs to be disabled by turning the Pre-heat selector switch to the OFF position. If the preheat button is blanked out then appliance does not have a pre-heat function.
2. This model assumes appliance is operating on natural gas If it has been converted to LPG refer to ADAPT for gas pressures and potential differences in part numbers.
