Ensure the hydroblock of appliance is brass as shown in the picture and appliance has a thermistor on the flow pipe on the left side.
If hydroblock is different or there is no flow thermistor close this model and reopen the correct XSol version.
Notes:
1. For correct use of this diagnostic model the Pre-heat function needs to be disabled by turning the Pre-heat selector switch to the OFF position. If the preheat button is blanked out then appliance does not have a pre-heat function.
2. This model assumes appliance is operating on natural gas If it has been converted to LPG refer to ADAPT for gas pressures and potential differences in part numbers.
If hydroblock is different or there is no flow thermistor close this model and reopen the correct XSol version.
Notes:
1. For correct use of this diagnostic model the Pre-heat function needs to be disabled by turning the Pre-heat selector switch to the OFF position. If the preheat button is blanked out then appliance does not have a pre-heat function.
2. This model assumes appliance is operating on natural gas If it has been converted to LPG refer to ADAPT for gas pressures and potential differences in part numbers.
