Observation:
Fault codes will be shown on the display along with some basic guidance, this information will display on a loop until the fault code is cleared.
There may be up to 6 messages shown in any given cycle, for example:
"Overheat lockout" > "Fill System to 1.0 bar" > "Bleed radiators" > "Check radiator valves open" > "Reset Boiler" > "Contact Installer" in this example choose "Overheat lockout" from the fault codes below.
Select from the list below the fault code that corresponds with that displayed by the boiler.
OVERHEAT LOCKOUT
TOO MANY RESETS
LOW WATER PRESSURE
FAN FAULT
RETURN THERMISTOR FAULT
PCB FAULT
PCB REPLACED
There may be up to 6 messages shown in any given cycle, for example:
"Overheat lockout" > "Fill System to 1.0 bar" > "Bleed radiators" > "Check radiator valves open" > "Reset Boiler" > "Contact Installer" in this example choose "Overheat lockout" from the fault codes below.
Select from the list below the fault code that corresponds with that displayed by the boiler.
OVERHEAT LOCKOUT
TOO MANY RESETS
LOW WATER PRESSURE
FAN FAULT
RETURN THERMISTOR FAULT
PCB FAULT
PCB REPLACED
