Set Appliance State:
Turn Hot Water Tap On
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Observation:
Allow the appliance to run and reach operating temperature.
Test 1:
Measure the temperature of the hot water at the tap.
Record the result of the temperature measured.
Test 2:
Measure the temperature of the hot water as it leaves the appliance.
Measure on the pipe leaving the appliance (as indicated by the red arrow)
Record the result of the temperature measured.
Compare the two readings.
Is the temperature at the tap approximately the same as the output from the appliance or is it significantly cooler ?
Test 1:
Measure the temperature of the hot water at the tap.
Record the result of the temperature measured.
Test 2:
Measure the temperature of the hot water as it leaves the appliance.
Measure on the pipe leaving the appliance (as indicated by the red arrow)
Record the result of the temperature measured.
Compare the two readings.
Is the temperature at the tap approximately the same as the output from the appliance or is it significantly cooler ?
