PREHEAT SATISFACTORY

Set Appliance State:

Ensure no demand
On/Off Switch ON
Ensure secondary heat exchanger is cool this can be done by running a hot tap with the boiler switched off

WARNING! - Mains voltage is expected during test follow
TOPs P4 live testing procedure

Mains Power On

Observation:

Allow preheat to complete, this is indicated by the tap symbol disappearing from the display.

Note:
From cold, preheat cycle will take approximately 90 seconds to complete but this will depend on the starting temperature.
The boiler will fire periodically for a few seconds to maintain the preheat temperature. The average time period between firing is 90 minutes but varies with the surrounding ambient temperature.

Click here if H3 fault displays during preheat operation