Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Remove the burner injector from its housing
Observation:
Inspect injector for damage and/or blockage.
These can become restricted and this will have an impact on the gas/ air ratio at the burner.
Note:
Upon reassembly all disturbed joints should be checked for gas tightness.
These can become restricted and this will have an impact on the gas/ air ratio at the burner.
Note:
Upon reassembly all disturbed joints should be checked for gas tightness.
Isolate as per TOPs P4
and refit as necessary