Set Appliance State:
Turn Hot Water Tap On
Observation:
Is the flow rate from the hot tap satisfactory?
Information:
Flow rate should be approximately as per the table.
If you have a flow rate above 2.5 litres a minute but below the rate shown in the table and you are CONFIDENT the fault is not due to the water flow rate select "FLOW RATE SATISFACTORY"
If the flow rate is below 2.5 litres a minute OR is above 2.5 litres per minute but below the rate shown in the table and you wish to investigate poor flow select "FLOW RATE UNSATISFACTORY".
Information:
Flow rate should be approximately as per the table.
If you have a flow rate above 2.5 litres a minute but below the rate shown in the table and you are CONFIDENT the fault is not due to the water flow rate select "FLOW RATE SATISFACTORY"
If the flow rate is below 2.5 litres a minute OR is above 2.5 litres per minute but below the rate shown in the table and you wish to investigate poor flow select "FLOW RATE UNSATISFACTORY".
