Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Set Multimeter to Resistance 
Gain access to PCB (use Insulation Mat as required)
Measurement:
Measure the resistance between pin 5 and 7
(grey wires) on X4 connector.
Resistance should be open circuit.
Notes:
1. Remember if a white PCB is fitted X4 is in a different position.
2. Colour of wires may differ but pins will be in same location.
(grey wires) on X4 connector.
Resistance should be open circuit.
Notes:
1. Remember if a white PCB is fitted X4 is in a different position.
2. Colour of wires may differ but pins will be in same location.
