Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Remove the electrode assembly
Observation:
Thoroughly check spark electrode for cracks and damage to the electrode ceramics and good general condition.
Confirm correct spark gap 4.5 mm (+/- 0.5 mm) adjust as required.
NOTE:
This component requires the air/gas manifold and fan assembly to be removed therefore the gasket between the gas air manifold and the heat exchanger must be changed.
Confirm correct spark gap 4.5 mm (+/- 0.5 mm) adjust as required.
NOTE:
This component requires the air/gas manifold and fan assembly to be removed therefore the gasket between the gas air manifold and the heat exchanger must be changed.
Isolate as per TOPs P4
and refit as necessary