Adjust, Service, Repair or Replace as necessary
Isolate Water and Gas as appropriate
Location:
Fitted to the back of the PCB on the L/H side of the rear of the control box. It is necessary to remove the metal back of the control box to remove the transformer. Remove earth electrodes prior to removal of back plate.
| Isolate Mains Power to appliance as per TOPs P4 |
Location:
Upon completion of the fault diagnostics carry out final electrical safety tests and checks as per TOPs (C6).
Part Number: 299516
Refer to ADAPT for further information.
Please leave Feedback about this diagnosis via:
XSOL FEEDBACK FORM
Phone - 722429
or Email - Diaglab@britishgas.co.uk
