Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Turn Hot Water Tap On
Attach U-gauge to gas valve outlet pressure test point
Gas On
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
Measurement:
Boiler ON/OFF switch ON.
Allow boiler to commence its ignition sequence.
Does U-gauge show a positive gas pressure?
Note:
When U-gauge is removed pressure test point should be tightened & checked for gas tightness.
Allow boiler to commence its ignition sequence.
Does U-gauge show a positive gas pressure?
Note:
When U-gauge is removed pressure test point should be tightened & checked for gas tightness.
Isolate as per TOPs P4
and refit as necessary