Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Measurement:
Please ensure the following system checks are completed:-
System/Boiler is correctly charged as necessary.
System/Boiler is bled of air.
Gas inlet pressure is correct.
Sufficient supply of mains cold water.
Bypass (internal or external to the boiler) is correctly adjusted as necessary.
Manual reset devices are set, there are two overheat reset buttons, they are located on the bottom of the control box one on the L/H side the other on the R/H side.
System/Boiler is correctly charged as necessary.
System/Boiler is bled of air.
Gas inlet pressure is correct.
Sufficient supply of mains cold water.
Bypass (internal or external to the boiler) is correctly adjusted as necessary.
Manual reset devices are set, there are two overheat reset buttons, they are located on the bottom of the control box one on the L/H side the other on the R/H side.
