To access the parameters press the tap and
radiator keys simultaneously and hold for 5 seconds.
The red LED flashes and the display shows:
PARAMETER 15 - % OF MAXIMUM HEATING OUTPUT
To access the parameters press the tap and
radiator keys simultaneously and hold for 5 seconds.
The red LED flashes and the display shows:
Scroll through using the tap or radiator key until the display shows 15 (this is parameter 15)
To enter the parameter press the + or - key. The value set flashes and the display will show a value between 30-99%
Note:
Whatever value is flashing on the display is the % of the maximum heating output the boiler is set at.
The default setting is 99%.
Whatever value is flashing on the display is the % of the maximum heating output the boiler is set at.
The default setting is 99%.
To exit the parameters press the Reset key.
Adjustment of parameter values;
To change the set value press the + or - keys.
To confirm the set value press the tap or radiator key.
To change the set value press the + or - keys.
To confirm the set value press the tap or radiator key.