INSPECTION PARAMETER 01 - COMBUSTION CONFIGURATION

Set Appliance State:

WARNING! - Mains voltage is expected during test follow
TOPs P4 live testing procedure

Mains Power On

Observation:

Follow the instructions below to check parameter 01.
Was the value in parameter 01 set correctly at 02 ?

sm.iqe-comfort-30.flashing-01.parameter.anni.gif

sm.iqe-comfort-30.flashing-02.parameter.anni.gif

Press the tap and radiator keys simultaneously and hold for 5 seconds. The red LED flashes and the display shows 01 (this is parameter 01)

To enter the parameter press the + or - key. The value set flashes and the display will show a value between 1 - 20.

Ensure that this value is set at 02.
To change the value press the + or - keys.
Confirm by pressing the tap or radiator key.
To EXIT press the Reset key.