INITIAL SETUP INFORMATION

Set Appliance State:

WARNING! - Mains voltage is expected during test follow
TOPs P4 live testing procedure

Mains Power On

Observation:

Ensure winter mode is selected (frost symbol) & CH & DHW temperature settings are set to maximum (see note), these settings are required for all tests unless stated otherwise in "Set Appliance State".

CH maximum temperature (first heating circuit) - 80 °C

DHW maximum temperature - 65 °C

Note.
First key press will wake up the display only.

sm iqe simplicity display st-by large.jpg

The winter mode icon must be in the display, press the ❄ button until symbol appears.

Set DHW temperature to MAX 65°C, press the tap symbol then press the + key to increase the temperature. Once the temperature is adjusted press the tap symbol to exit.

Set CH temperature (first heating circuit) to MAX 80°C, press the radiator symbol then press the + key to increase the temperature. Once the temperature is adjusted press the radiator symbol to exit.