Observation:
| WARNING! - Mains voltage is expected during test follow TOPs P4 live testing procedure |
1. Press the reset button for 20 seconds, the 'scroll line' will continually alternate on the display during this time, at the end of the 20 seconds tS will appear on the display.
2. Press the reset button for 1 second, the display will show P01, this is Parameter P01.
3. Press the DHW button, the parameter value will appear on the display, to modify the parameter use the DHW buttons to increase or decrease the value, once modified the parameter value will be saved automatically.
4. To access the other parameters press the CH buttons until the desired parameter is reached, use the DHW buttons to select and modify the parameter, repeat this process until all required parameters are correctly set.
5. To exit the transparent parameters, either press the reset button for 20 seconds, turn the mains power off then on again or wait for it to exit automatically after 15 minutes.
