Set Appliance State:
| Isolate Mains Power to appliance as per TOPs P4 |
Observation:
While taking care to avoid any possible water damage, remove the rubber pipe from the bottom of the recuperator and inspect for any signs of blockages or restrictions.
Inspect the condensate trap and pipework
for blockages or restrictions.
Note:
Take care when removing pipe as the metal
plate directly beneath is very sharp.
Inspect the condensate trap and pipework
for blockages or restrictions.
Note:
Take care when removing pipe as the metal
plate directly beneath is very sharp.
Isolate as per TOPs P4
and refit as necessary