Adjust, Service, Repair or Replace as necessary
Isolate Mains Power to appliance as per TOPs P4
Isolate Water and Gas as appropriate

Location:
Tests have proven that there is no voltage to the gas valve and the reason for this is because the PCB has been damaged by the faulty harness to the gas valve. The gas valve harness must be repaired or replaced before the new PCB is fitted.
Upon completion of the fault diagnostics carry out final electrical safety tests and checks as per TOPs (C6).
Part Number: 725272


Refer to ADAPT for further information.

Please leave Feedback about this diagnosis via:
XSOL FEEDBACK FORM
Phone - 722429
or Email - Diaglab@britishgas.co.uk